Its_All.Lost
Because hope just breeds everlasting misery…

OpenNept4une

OpenNept4une

If you have an Elegoo Neptune 4 series printer and are in the Elegoo Facebook group you may have heard of OpenNept4une by now. If not, you have now. From what I can tell there are two current thoughts about the Elegoo Neptune 4 series printers. One – the printer has a bunch of flaws and just won’t print properly and it is due to Elegoo’s touch of the Klipper software and installing OpenNept4une will resolve all of these issues. Two – the printer is fine and works fine, but you want community Klipper and to be able to update the software without things breaking. You want to be able to add things and be more up to date following the community with its version of Klipper.

I have not had any issues with my Neptune 4 Max for the few months I’ve owned it, I have printed about 20 rolls of PETG so far. But I noticed Elegoo’s Klipper is a few versions behind and they don’t offer updates much. There are a few things I would like to get play with and get working (Spoolman) and I would like to be able to use KIAUH. Plus I like to tinker. With a stock Neptune you cannot update the OS either, which I don’t like. Anyway, I decided to take the OpenNept4une plunge and I documented my process.

The Wiki/install guide on the OpenNept4une GitHub is fantastic. You can head over there and you should be able to follow that guide, it’s a bit more technical so I decided to write up what I did. I have a Neptune 4 Max so all of these instructions here on my blog are for the Max. They may or may not be the same and/or work for other Neptune 4 printers I have no idea. There are probably other steps for other printers, check the Wiki – you have been warned.

View Post

Spaghetti Detective (Obico) on the Neptune 4 Max

Neptune and Obico

I have been using the Neptune 4 Max for a little over a month now. Love the printer, but it can misbehave. I have been printing for a few years now and I can count on one hand how many spaghetti monsters I have printed. That number has already been dwarfed with the addition of my N4M. While doing some research on why and how to stop it I came across the Spaghetti Detective (renamed Obico). I have heard of this many years ago and just never had a use for it, plus it costs money. I did a little more looking this time and found out you can self-host the platform to use the detective. No more paying for it. I like free. I should note that Obico does have a free tier, but it only provides 10hours of AI crunching detection.

Here’s how I installed Obico/Spaghetti Detective on my Neptune 4 Max. You should be able to follow Obico’s installation instructions and just adjusting the file paths but just in case I wrote up how I did it. I have a small Linux server (an Intel NUC) that sits in my office and runs all of my goodies. Anything that needs to run 24/7 or be accessible at all times lives there. Unfortunately while a Raspberry Pi is great for most things Obico states that they do not have enough power to run the AI software. A more robust piece of hardware is required, any old computer or laptop should work. They did just release the Pi5 so I am curious if that would work. If the machine has an NVIDIA card in it even better.

Obico released a small guide to get you started with Obico and the Neptune 4 Max with the cloud. These directions will get your printer setup for Obico. There are similar instructions below on how I did it for the self-hosted version of Obico.

[https://www.obico.io/blog/elegoo-neptune-4-and-obico-ai-3d-printing-revolution/]

View Post