Its_All.Lost
Because hope just breeds everlasting misery…

Spaghetti Detective (Obico) on the Neptune 4 Max

Neptune and Obico

I have been using the Neptune 4 Max for a little over a month now. Love the printer, but it can misbehave. I have been printing for a few years now and I can count on one hand how many spaghetti monsters I have printed. That number has already been dwarfed with the addition of my N4M. While doing some research on why and how to stop it I came across the Spaghetti Detective (renamed Obico). I have heard of this many years ago and just never had a use for it, plus it costs money. I did a little more looking this time and found out you can self-host the platform to use the detective. No more paying for it. I like free. I should note that Obico does have a free tier, but it only provides 10hours of AI crunching detection.

Here’s how I installed Obico/Spaghetti Detective on my Neptune 4 Max. You should be able to follow Obico’s installation instructions and just adjusting the file paths but just in case I wrote up how I did it. I have a small Linux server (an Intel NUC) that sits in my office and runs all of my goodies. Anything that needs to run 24/7 or be accessible at all times lives there. Unfortunately while a Raspberry Pi is great for most things Obico states that they do not have enough power to run the AI software. A more robust piece of hardware is required, any old computer or laptop should work. They did just release the Pi5 so I am curious if that would work. If the machine has an NVIDIA card in it even better.

Obico released a small guide to get you started with Obico and the Neptune 4 Max with the cloud. These directions will get your printer setup for Obico. There are similar instructions below on how I did it for the self-hosted version of Obico.

[https://www.obico.io/blog/elegoo-neptune-4-and-obico-ai-3d-printing-revolution/]

View Post

Zabbix Notifications

Zabbix

It all started when my Plex Media Server/Playground box (a little NUC8i3BEK) started having some not so good fan noises emanating from it. I ordered a new fan on Amazon to replace it and go fucking figure the fan noises stop when the new replacement fan arrived. So I shelved the new part, I still have it because I am sure I will need it eventually but for now the original is working fine but I don’t trust it and this leads me finally to my point. I needed a way to monitor my CPU temperatures AND send me a notification. There are a ton of ways to see your CPU temperature but not a whole lot of ways to be notified when they hit certain thresholds. Hello Zabbix!

This took me my entire night to get done, so it shouldn’t for you. You’re welcome.

After Googling for a bit I came across an AskUbuntu Question that sent me in the direction of Zabbix. I’ll drop the link to the question so you can see the other options available similar to Zabbix. I went through the list and settled on Zabbix it seemed to fit the bill for what I wanted.

If you go to their downloads page there is a handy chart with step-by-step directions on how to install Zabbix on your system. I went with v6.4 – Ubuntu – 22.04 – Server, frontend, Agent – MySQL – Nginx. I will list those steps here for Zabbix on Ubuntu with Nginx, if you have a different system OS or Apache you should check out the download page for install directions.

View Post